Rapid XCEL 1630 (LDPE)
Products from producer
In stock
Reconfirm the price with seller
- Customer pickup,
- Courier
- In detail
Products of other enterprises
Technical characteristics
- BrandRapid
Description
Rapid XCEL 1630 is a polyethylene based free-flowing powder. The key characteristics of this powder are low melting temperature, and excellent high-gloss coatings.
Low melting temperatures helps to increase line speeds and lower energy costs. These powders are generally preferred where both aesthetic as well as functional properties are desired. In addition to this, the resulting coating provides excellent edge coverage and corrosion protection.
All powders are manufactured from prime virgin grades of polymers manufactured by the major polymer producers. All the grades mentioned have been manufactured from polymers that meet the requirements to Indian Standard IS: 10146-1982 on "Polyethylene for its safe use in contact with foodstuffs, pharmaceuticals, and drinking water".
All the colors are hot melt compounded in high performance extruders. This ensures a uniform dispersion of pigments and additives in the resin. This enhances the UV stability of the polymer. It also prevents color variation form product to product, pigment migration and pigment wipe off.
Colors/Shades with Codes Low Density Polyethylene Powder: LDPE 1630 has the following colors/shades denoted by their codes-
PRODUCTS CODE INDEX OF CODE White LDGW 300 LD- Low Density Signal Red LDSR 300 GW- General White Oxford Blue LDOL 300 SR - Signal Red Bright Green LDNG 300 OL - Oxford Blue Light Blue LDLL 300 NG - Bright Green Natural LDNN 300 LL - Light Blue NN - Natural Technical Specifications (Data shown are average values and should not be used for specification results)
PROPERTY TEST METHOD VALUE Material Prime Virgin Grade Polyethylene Specific Gravity ASTM D1505 0.918 gms./cc Vicat Softening Point ASTM D1525 84°C Melt Indix 190°C/I2.16 ASTM D1238 ~30 gms./10 min Tensile Strength at Yield ASTM D638 90 kg/cm2 Elongation at Yield ASTM D638 700% Flexural Modulus ASTM D790 1,400 kg/cm2 Powder Particle Size Finer than 300µm Coverage 100% efficiency 3.1 m2/kg.@350mm Taber Abrasion ASTM D4060 30 mg. Weight loss QUV ASTM D2244 0.5 ÑE
Low melting temperatures helps to increase line speeds and lower energy costs. These powders are generally preferred where both aesthetic as well as functional properties are desired. In addition to this, the resulting coating provides excellent edge coverage and corrosion protection.
All powders are manufactured from prime virgin grades of polymers manufactured by the major polymer producers. All the grades mentioned have been manufactured from polymers that meet the requirements to Indian Standard IS: 10146-1982 on "Polyethylene for its safe use in contact with foodstuffs, pharmaceuticals, and drinking water".
All the colors are hot melt compounded in high performance extruders. This ensures a uniform dispersion of pigments and additives in the resin. This enhances the UV stability of the polymer. It also prevents color variation form product to product, pigment migration and pigment wipe off.
SALIENT FEATURES
- Colouring is hot melt compounded and hence consistent
- Good impact strength
- Economical
- High Gloss
- Smooth Surface
- Good Durability & Flexibility
- Good Adhesion
- Weathering Resistance
- Eco Friendly No V.O.C' S
- Wide Service Temperature
- No Harmful Fumes
- Primerless Coating
- Single Coat High Thickness
- Easily Repairable
- Phosphating Not Essential
- Ease & Simplicity of Coating
- Corrosion Protection
- Custom Colours Offered
- Enhances Product Appearance and Feel
Colors/Shades with Codes Low Density Polyethylene Powder: LDPE 1630 has the following colors/shades denoted by their codes-
PRODUCTS CODE INDEX OF CODE White LDGW 300 LD- Low Density Signal Red LDSR 300 GW- General White Oxford Blue LDOL 300 SR - Signal Red Bright Green LDNG 300 OL - Oxford Blue Light Blue LDLL 300 NG - Bright Green Natural LDNN 300 LL - Light Blue NN - Natural Technical Specifications (Data shown are average values and should not be used for specification results)
PROPERTY TEST METHOD VALUE Material Prime Virgin Grade Polyethylene Specific Gravity ASTM D1505 0.918 gms./cc Vicat Softening Point ASTM D1525 84°C Melt Indix 190°C/I2.16 ASTM D1238 ~30 gms./10 min Tensile Strength at Yield ASTM D638 90 kg/cm2 Elongation at Yield ASTM D638 700% Flexural Modulus ASTM D790 1,400 kg/cm2 Powder Particle Size Finer than 300µm Coverage 100% efficiency 3.1 m2/kg.@350mm Taber Abrasion ASTM D4060 30 mg. Weight loss QUV ASTM D2244 0.5 ÑE
TYPICAL APPLICATIONS
These powders are generally used for coating wire fabricated articles like- Scooter / cycle baskets
- Car / scooter back light grills
- Refrigerator shelves
- Kitchen rack/ baskets
- Hangers
- Display racks
- Formed wire goods
- Wire baskets
Contact the seller
Rapid XCEL 1630 (LDPE)